Senba Sensing초전기 적외선 감지에 초점19년 이상의 전문 제조 PIR 센서
Senba Sensing초전기 적외선 감지에 초점19년 이상의 전문 제조 PIR 센서
PROD Model: YS312
Window Size: 3*4mm
Output Signal:Digital signal output
Sensing Distance: 10M (lens SB-F-02)
See lens selection for different distances
Sensing Angle: 120° (horizontal direction)
Working Voltage: 2.2-5.5V
Static Power Consumption: <15uA
Recommended Supporting IC: Customized MCU
YS312 is a pyroelectric infrared sensor that integrates AD chip and human body detection sensor in an electromagnetic shield. The human body detection sensor transmits the sensed human body movement signal to the AD chip, which outputs the 16-bit digital signal through acquisition and filtering, and realizes related functions through the single chip microcomputer of the peripheral circuit.
16-bit digital signal output
Single-wire serial data
Low power consumption
1.Absolute Maximum Ratings
Electrical characteristics(beyond those listed below may cause permanent damage to the device. Exposure to absolute maximum ratings may affect the device reliability. )
Parameter | Symbol | Min | Max | Unit | Remarks |
Operating Temp | TST | -30 | 70 | ℃ | |
Current into any pin | Into | -100 | 100 | mA | |
Storage Temp | TST | -40 | 80 | ℃ |
2.Operating Conditions (T=25°C, Vdd=3V，unless stated otherwise)
Parameter | Symbol | Min | Type | Max | Unit | Remarks |
Regular voltage | VDD | 2.2 | 3.3 | 5.5 | V | |
Operation current | IDD | 5 | 10 | 20 | μA | |
ADC Resolution | 16 | Bits | ||||
Detective Wavelength | λ | 5 | 14 | um | ||
LPF cutoff frequency | 7 | Hz | ||||
HPF cutoff frequency | 0.44 | Hz |
Precautions:
1. The factory parameters of the sensor are obtained after a few minutes of stabilization time under the standard black body and stable test environment.
2. The sensor needs to be used with a Fresnel lens to achieve the ideal sensing angle and sensing distance.
3. The sensing distance of the sensor is directly related to the ambient temperature and humidity, the temperature and moving direction of the acquisition target, the Fresnel lens, and the magnification setting. Please consider it comprehensively when using it.
4. The sensitive components inside the sensor are relatively thin and brittle. Please handle it with care when using it. High-frequency vibration or drop impact may cause the sensitive components to break.
5. The sensor window is a silicon-based semiconductor special material vacuum-coated filter lens. Please do not touch it directly with your hands or hard objects.
6. Selection of sensor window: analog in-line dual-element products: S: 3*4mm, B: 3.8*5mm, digital in-line dual-element products: S: 3*4mm, L: 3.8*5mm, M: 4.2*5.2 mm, in-line quaternary products: X: 4*4mm, Q: 4.9*4.9mm. For details, please communicate with the salesperson.
7. Sensor lead length selection: the default default is 13.5mm. If you have other needs, you can consult the salesman for details. Customized lead length is supported.
8. For other details of the sensor, please refer to the product manual.